|
Important Notice:
The BWC 1500 will be discontinued effective
February 15, 2002 due to its replacement by the BWC XL.1. Warranties will
be fully honored and full service support for existing customers with BWC 1500's
will be maintained.
The BWC 1500 is a modern 3 meter
diameter (10 ft), 1,500 Watt wind turbine designed for high
reliability, low maintenance, and automatic
operation in adverse weather conditions. It is available in
both battery charging and water pumping versions. It is built much more
ruggedly than most other turbines of its size and it carries the longest warranty
(5 years) in the industry.
Battery charging BWC 1500's can be supplied with outputs of 12, 24, 48,
or 120 VDC. They are well suited for rural homes, cabins, remote villages, and
telecommunications sites, where it can typically support continuous loads of 150 - 300
Watts. The BWC 1500 is often installed along with PV modules. The BWC
VCS-1.5 controller features the OptiCharge system for extended battery life.
As a water pumping system, the BWC 1500 can be located as much as 300 m (1000 ft) from the well to
take advantage of improved wind conditions. USDA tests have shown that the BWC 1500-PD
can be more cost effective than a conventional mechanical windmill. In many situations it is two
or three times as cost effective as PV-powered pump systems.
Prices, which include electronics, range from $4,700 to $5,400. For severe sites, an Extra-Stiff blade option is available for an additional
$265.
The BWC 1500 is most often installed on a guyed lattice tower, which is available in
heights of 12.2 m (40 ft) to 37 m (120 ft.). Prices
range from $1,500 to $3,900. A list of requirements for customer supplied towers is
available.
The BWC was introduced in 1990 and it has been installed at over 400 sites
around the world. We invite you to review our list of notable customers
and our case studies.
|
|
Start-up Wind Speed: 3.6 m/s (8 mph)
Cut-in Wind Speed: 3.6 m/s (8 mph)
Rated Wind Speed: 12.5 m/s (28 mph)
Rated Power: 1500 Watts
Cut-Out Wind Speed: None
Furling Wind Speed: 14.3 m/s (32 mph)
Max. Design Wind Speed: 54 m/s (120 mph)
BWC 1500 Specification Sheet (230 K)
Technical Features Sheet (140 K)
|
Type: 3 Blade Upwind
Rotor Diameter: 3 m (10 ft.)
Blade Pitch Control: POWERFLEX®
Overspeed Protection: AUTOFURL
Gearbox: None, Direct Drive
Temperature Range: -40 to +60 Deg.
C (-40 to +140 Deg. F)
Generator: Permanent Magnet Alternator
Output Form: 3 Phase AC, Variable Frequency (Regulated 12 - 120 VDC after VCS-1.5)
|